TABLE 1-2 Meaning of Setup Switch Settings
Switch
1
2
3
4
On
(Down)
Recorded
announcements are
retained during a
power outage
Routes and other
programming
parameters are
retained during a
power outage
The MERLIN II
Attendant continues to
answer calls during a
power outage
Not Used
Off (up)
Recorded
announcements are
erased during a power
outage
Routes and other
programming
parameters are reset to
defaults during a
power outage
The MERLIN II
Attendant does not
answer calls during a
power outage
Not Used
CAUTION:
After connecting ac power to the
MERLIN II Attendant, be sure that switches 1 and 2 are
on (down). With this setting, recorded announcements
are saved up to three hours during a power outage
(assuming the battery is fully charged) and routing
plans and programming parameters are retained up to
eight weeks.
10 VAC
This is
the
serial i/o
This is the
diagnostic
audio out
Not used
reserved
Not used
power connector.
connection for the printer to perform
tests.
Overview 1 - 5
Summary of Contents for MERLIN II Attendant
Page 1: ...AT T MERLIN II COMMUNICATIONS SYSTEM MERLIN II Attendant Installer s Guide...
Page 21: ...FIGURE 1 4 Connecting the MERLIN II Attendant Connecting the MERLIN II Attendant 1 17...
Page 33: ...FIGURE 2 2 Supervised Transfer process 2 12 Programming Features...
Page 35: ...FIGURE 2 3 Immediate and Backup Call Handling 2 14 Programming Features...