Administration Procedures
Before installing the MERLIN II Attendant you must
administer a port on the Basic Telephone (012) module for
each unit you are connecting.
CAUTION:
Do not administer the port for outward call
restriction.
While you are performing administration procedures, you
should also administer the lines that will be assigned to the
MERLIN II Attendant(s). Ask the customer which lines
are being answered by the MERLIN II Attendant,
including backup call handling and Night Service.
If you are installing more than one MERLIN II Attendant
to answer the same lines or line pools, you need to assign
these ports on the Basic Telephone (012) Module to the
same Call Distribution Group to prevent call contention
between the units.
Perform all the appropriate administration procedures
from the MERLIN II System Display Console:
ADMINISTERING A
Use the following procedure to administer a port for the
PORT ON THE BASIC
MERLIN II Attendant:
TELEPHONE (012)
MODULE
1
Enter administration mode by sliding the T/P switch to
P .
2
Press
Conference
twice.
The administration menu appears.
3
Press
Stations , More , More , More , AA/VMS
.
4
Press the Auto Intercom button for each port you want
assigned to the MERLIN II Attendant.
Green light on = station is assigned to a MERLIN II Attendant
Green light off = station is assigned to a basic telephone
1-10 Administration Procedures
Summary of Contents for MERLIN II Attendant
Page 1: ...AT T MERLIN II COMMUNICATIONS SYSTEM MERLIN II Attendant Installer s Guide...
Page 21: ...FIGURE 1 4 Connecting the MERLIN II Attendant Connecting the MERLIN II Attendant 1 17...
Page 33: ...FIGURE 2 2 Supervised Transfer process 2 12 Programming Features...
Page 35: ...FIGURE 2 3 Immediate and Backup Call Handling 2 14 Programming Features...
