AT&T Merlin 1030 Administration Manual Download Page 141

Page: 141 / 191

Fixed Features (continued)

Feature

Description

Monitor-on-Hold

Use your voice terminal’s speaker to listen for a caller to return when you’ve been put on hold.

Speaker

• Frees you to do other work when you’ve been put on hold.

On-Hook Dialing

Turn on the speaker and dial an outside or intercom call without lifting the handset.

Speaker

Recall

Touch Recall instead of pressing the switchhook to access PBX, Centrex, or Custom Call-

ing features. If your MERLIN system isn’t connected to a PBX or Centrex system, and if you
aren’t using a Custom Calling feature, use Recall to disconnect a call without hanging up
your handset.

Ringing Line Selection

Answer a call without touching any buttons because your MERLIN system automatically
selects the ringing line when a call comes in.

Send Message

If you’re an attendant, notify a person that a message is waiting by touching Send Message.

Transfer

Pass outside calls to any voice terminal in your MERLIN system. Transfer calls with or without

an intercom announcement.

• Attendants can screen calls on intercom as part of transfer.

Transfer Return

Hear unanswered transferred calls ring again at the voice terminal from which they were

transferred.

• Transferred calls are not lost.
• The attendant can tell from which voice terminal a transferred call is returning.

Voice Terminal

Program voice terminals with custom features according to business and individual needs.

Programming

Voice Terminal Testing

Determine whether all lights and ringing mechanisms are working by sliding the T/P switch
on the left side of the voice terminal to the T position.

Volume Control

Adjust the sound level of a voice terminal’s ring and speaker.

138

Summary of Contents for Merlin 1030































































































































































































Search results

Summary of Contents for Merlin 1030

Reviews:

Brands by name

Popular brands

AT&T Merlin 1030, Administration Manual

Search results

Summary of Contents for Merlin 1030

Reviews:

Brands by name

Popular brands