AT&T GL2101-2 Complete User'S Manual Download Page 79

Page: 79 / 82

Appendix

Technical specifications

RF frequency band

1921.536MHz — 1928.448MHz

Channels

Telephone base voltage

(AC voltage, 60Hz)

96 — 129 Vrms

Telephone base voltage

(DC adapter output)

6VDC @0.6A

Max. PS1 or LPS

Handset voltage

2.4 VDC, AAA x 2, Ni-MH

Charger voltage

(DC adapter output)

6VDC @0.4A

Max. PS1 or LPS

Operating times*

Talk time (handset): up to 10 hours

Standby: up to 5 days

* Operating times vary depending on your actual use and the age of the battery.

DECT 6.0 digital technology
The AT&T DECT 6.0 products offer unsurpassed range performance and sound clarity.

This is achieved through a unique antenna design and advances in noise-filtering

technology. An independent laboratory has confirmed that AT&T DECT 6.0 products

perform up to 45% better in range competitions against similarly equipped phones of

the leading competition. Now, calls can be taken in the basement, backyard and garage

with exceptional sound quality.

Telephone operating range
This cordless telephone operates within the maximum power allowed by the Federal

Communications Commission (FCC). Even so, this handset and telephone base can

communicate over a certain distance — which can vary with the locations of the

telephone base and handset, the weather, and the construction of your home or office.

Redefining long range coverage and clarity
This telephone base comes with an antenna which gives much better clarity and covers

a longer range than before.

Simulated full-duplex handset and base speakerphones
The simulated full-duplex speakerphones on your handset and telephone base allow

both ends of a call to speak and be heard at the same time. Optimal performance is

subject to external factors and individual usage.

Summary of Contents for GL2101-2



















































































Search results

Summary of Contents for GL2101-2

Reviews:

Related manuals for GL2101-2

Brands by name

Popular brands

AT&T GL2101-2, Complete User'S Manual

Search results

Summary of Contents for GL2101-2

Reviews:

Related manuals for GL2101-2

Brands by name

Popular brands