manualshive.com logo in svg

AT&T FAX Attendant Release 2.1.1, System Manager'S Manual

"AT&T FAX Attendant Release 2.1.1 is an advanced communication software designed to streamline fax management. This System Manager's Manual offers comprehensive instructions for a smooth user experience. Download this manual for free at manualshive.com, where you can access a wide range of user manuals to enhance your productivity."

Share
Download
background image

System Messages

bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb

bbbbb

741 (DG_RESLT), STATUS
MTC reports diag results on card <device>, return= <integer>, errno=
<integer>, <string>.

Maintenance reports: diagnostic results.

742 (DG_PASSD), STATUS
MTC reports diag passed on (<string>) card <device>.

Maintenance reports: diagnostics have passed on a hardware card.

750 (DG_FAILD), STATUS
MTC reports diag failed on card <device>, because <string>.

Maintenance reports: diagnostics have failed on a hardware card.  This is an
indication of hardware problems.  The board may need to be replaced.

Try removing the device from service, and rebooting the system.  If the
device passes initial boot diagnostics, you may then restore the device.

Data Base Initialization (DBINIT)

bbbbbbbbbbbbbbb

1701 (NO _DBFILE), MAJOR
NO <string> SHMEM File.

The system is unable to initialize its shared memory properly.

Call your Field Service Representative.

Tip/Ring Interface Process (TRIP)

bbbbbbbbbbbbbbb

2000 (TRIP_OPEN), CRITICAL
TRIP: Tip/Ring Driver Open Failure, Reason <integer>

The Tip/Ring Input Process is unable to access any of the tip/ring boards in the
cabinet. The reason number may be found in the Introduction to Section 2 of the
UNIX Programmer Reference Manual.

Ensure that only a single copy of the voice software is operational.

Attempt a software restart.

Make sure that the generic software has been properly installed.

Attempt to reboot the system.

As a last resort reload the generic software.

 

B-23

Summary of Contents for FAX Attendant Release 2.1.1








































































































































































































































Reviews:

No comments

Related manuals for FAX Attendant Release 2.1.1

MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Brand: MACROMEDIA Pages: 72
NAPCO ISEEVIDEO Brochure preview
ISEEVIDEO
Brand: NAPCO Pages: 1
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
Sony D-NE329SP - Atrac Cd Walkman Portable Player Specifications preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE20 - Atrac Cd Walkman Specifications preview
D-NE20 - Atrac Cd Walkman
Brand: Sony Pages: 2
Sony D-NE326CK - Atrac Cd Walkman Portable Player Specifications preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 2
Sony D-NE329SP - Atrac Cd Walkman Portable Player Service Manual preview
D-NE329SP - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 32
Sony D-NE1 - Portable Cd Player Service Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 34
Sony D-NE326CK - Atrac Cd Walkman Portable Player Operating Instructions Manual preview
D-NE326CK - Atrac Cd Walkman Portable Player
Brand: Sony Pages: 35
Sony D-NE1 - Portable Cd Player Operating Instructions Manual preview
D-NE1 - Portable Cd Player
Brand: Sony Pages: 116
EverFocus PowerVideo Plus User Manual preview
PowerVideo Plus
Brand: EverFocus Pages: 80
Texas Instruments DSP/BIOS Real-Time Analysis User Manual preview
DSP/BIOS Real-Time Analysis
Brand: Texas Instruments Pages: 29
Genius KIDSBALL Manual preview
KIDSBALL
Brand: Genius Pages: 7
Genius F509 User Manual preview
F509
Brand: Genius Pages: 11
Macrovision Corporation SAMREPORT-LITE 2006 Manual preview
SAMREPORT-LITE 2006
Brand: Macrovision Corporation Pages: 36
Ulead MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0 Manual preview
MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0
Brand: Ulead Pages: 11
IBM TIVOLI ADSTAR 5697-VM3 User Manual preview
TIVOLI ADSTAR 5697-VM3
Brand: IBM Pages: 62
KAPERSKY ANTI-VIRUS 6.0 User Manual preview
ANTI-VIRUS 6.0
Brand: KAPERSKY Pages: 298

Brands by name

Popular brands

Load more brands