71
Adding and registering handsets/headsets/speakerphones
Your telephone can support up to five DECT 6.0 cordless handsets, headsets
or speakerphones. You can purchase additional handsets AT&T EL50005,
cordless headsets or speakerphones (sold separately) to expand your
telephone system. Visit
www.telephones.att.com/accessories
for a list of compatible DECT 6.0 cordless headsets and speakerphones.
Each new handset, headset or speakerphone must be registered to the
telephone base before use. You must register each handset, headset or
speakerphone separately.
To register a cordless headset or speakerphone to this telephone system,
please refer to the corresponding user’s manual for details. To register a
cordless handset, see below.
The handsets provided within your product box are already registered as
hAnDsET 1
, and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to
hAnDsET 5
).
register a handset to the telephone base
Before you begin registration, make
sure the handset is out of the telephone
base or charger and shows
To register
hs...
and
...see manual
, alternately.
Put the handset you wish to register on
the telephone base cradle.
The
light on the telephone
base turns on. After about 10 seconds,
the handset shows
registering...
.
The handset shows
registered
and
you hear a confirmation tone if the
registration was successful. The
light turns off. The handset is now
registered with the telephone base.
If the registration fails, the handset displays
failed
and then
To register hs...
and
...see manual
, alternately. Try the registration again by removing the
handset from the telephone base and then placing it back in.
notes
:
You cannot register a handset if any other system handset is in use.
You can only register one handset to the telephone base at a time.
1.
2.
3.
•
•
Appendix
For registration, put the handset on the
telephone base, not the handset charger.
