manualshive.com logo in svg

AT&T EL52315, User Manual

Share
Download
AT&T EL52315 User Manual Download Page 12

Getting started

6

Telephone base and charger installation

Install the telephone base and charger, as shown below. If you subscribe 
to high-speed Internet service (DSL - digital subscriber line) through your 
telephone line, you must install a DSL filter between the telephone line cord 
and the telephone wall jack. The filter prevents noise and caller ID problems 
caused by DSL interference. Please contact your DSL service provider for 
more information about DSL filters.
The telephone base comes ready for tabletop use. If you want to mount your 
telephone on a wall, refer to 

Wall-mount installation 

on pages

 

10-12  

for details.

Plug the large end 
of the charger’s 
power adapter into 
an electrical outlet 
not controlled by a 
wall switch.

Ensure the small 
end of the charger’s 
power adapter is 
plugged into the 
power jack on 
the bottom of the 
charger.

IMporTAnT InforMATIon:

Use only the power adapter(s) provided with this 
product. To obtain a replacement, visit our website 
at

 

www.telephones.att.com

 

or call

 

1 (800) 222-3111

. In Canada, dial

  

1 (866) 288-4268

.

Plug the large end 
of the base power 
adapter into an 
electrical outlet not 
controlled by a wall 
switch.

Plug the small end of 
the base power adapter 
into the power jack 
on the bottom of the 
telephone base.

Plug one end of the 
telephone line cord into 
a telephone wall jack.

A DSL filter (not 
included) is required 
if you have DSL high-
speed Internet service.

Route the cords 
through the slots.

Plug the other end of 
the telephone line cord 
into the telephone line 
jack on the bottom of 
the telephone base.

Summary of Contents for EL52315












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands