manualshive.com logo in svg

AT&T EL51110, User Manual, Page: 28 / 69

Share
Download
AT&T EL51110 User Manual Download Page 28

23

Telephone operation

To make and answer an intercom call

Use the intercom feature for conversations between handsets.

Press 

INT

 on your handset when not in use.

If you have two handsets, your handset screen shows 

CALLING HANDSET X

.

If you have more than two handsets, your handset screen 
shows 

INTERCOM TO:

 Use the dial pad keys to select the 

other handset. Your handset screen shows  

CALLING HANDSET X

.

The other handset rings and its screen shows  

HANDSET X IS CALLING

.

To answer the intercom call, press any dial pad key (0-9,  

, or #), 

PHONE/

FLASH

, 

SPEAKER

 or 

INT

 on the other 

handset. Both handsets now show 

INTERCOM

.

To end an intercom call, press 

OFF/

CLEAR

 or place 

the handset back in the telephone base or charger. Both 
handsets now show 

INTERCOM ENDED

.

NOTES:

Before the intercom call is answered, you can cancel it by pressing 

OFF/

CLEAR

 or 

INT

 on 

your originating handset.
If the other handset is not answered within 100 seconds, is in use, on a call or is out of 
range, your originating handset shows 

UNABLE TO CALL TRY AGAIN

.

Pressing 

OFF/

CLEAR

 or 

MUTE/

DELETE

 temporarily silences the intercom ringer.

If you have four handsets, when two handsets are on an intercom call, the other two system 
handsets can be used on an outside call (see 

Join a call in process

 on page 21) or a 

separate intercom call.

To answer an incoming call during an intercom call

If you receive an incoming outside call during an intercom call, there is an alert tone.

To answer the incoming outside call:

Press 

PHONE/

FLASH

. The intercom call ends automatically.

To end the intercom call without answering the incoming outside call:

Press 

OFF/

CLEAR

. The intercom call ends and the handsets ring for the 

incoming call.

1.

•

•

•

2.

3.

•

•

•
•

•

•

Intercom

CALLING

HANDSET X

INTERCOM

INTERCOM TO:

Summary of Contents for EL51110






































































Reviews:

No comments