manualshive.com logo in svg

AT&T EL51110, User Manual, Page: 11 / 69

Share
Download
AT&T EL51110 User Manual Download Page 11

6

Getting started

Battery installation and charging

Battery charging

Once you have installed the battery, the screen indicates 
the battery status (see the table below). If necessary, place 
the handset in the telephone base or charger to charge 
the battery. For best performance, keep the handset in the 
telephone base or charger when not in use. The battery is 
fully charged after 16 hours of continuous charging. See 

Technical specifications

 on page 61 for battery  

operating times.

If the screen is blank, you need to charge the handset without interruption for 
at least 30 minutes to give the handset enough charge to use the telephone 
for a short time. The screen shows 

LOW BATTERY

 until you have charged 

the battery without interruption for at least 30 minutes. The following table 
summarizes the battery charge indicators and actions to take.

Battery indicators

Battery status

Action

The screen is blank or shows 

PLACE IN CHARGER

.

Battery has no or very little 
charge. The handset cannot 
be used.

Charge without interruption 
until the screen shows  

LOW BATTERY

 or 

HANDSET X

 

(at least 30 minutes).

The screen shows  

LOW BATTERY

 and   flashes.

Battery has enough charge to 
be used for a short time.

Charge without interruption 
until the screen shows 

HANDSET X

 (at least  

30 minutes).

The screen shows 

HANDSET X

 

and the battery icon shows  

,   or  .

Battery is charged.

To keep the battery charged, 
place it in the telephone base 
or charger when not in use.

NOTES:

If you are on a call in low battery mode, you hear four short beeps every 50 seconds.
When you place the handset in the telephone base or charger, if no battery is installed in that 
handset, the 

CHARGE

 light is off and the screen shows 

NO BATTERY

. Follow the instructions 

in 

Battery installation

 on page 5 to install the battery.

•
•

Battery status icon

11/20

HANDSET 1

16 MISSED CALLS

10:30

PM

Summary of Contents for EL51110






































































Reviews:

No comments