AT&T CRL32102, Complete User'S Manual

Page: 33 / 91

27
Telephone operation
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
1. During the call, press MENU/
SELECT
.
2. Press
MENU
/SELECT to choose >Transfer .
If you have two handsets, the outside call is put on
hold and your handset shows
Transferring call... .
The other handset rings and shows Transfer from
other handset .
If you have more than two handsets, your screen
shows
TRANSFER TO:
. Use the dialing keys to eenter a
specific handset number (
1-9
for handsets 1-9,
TONE
followed by
0
-
2
for
handsets 10-12, or
TONE
followed by
#
for all handsets), or press press
q
CID
or
p
DIR
to scroll to the desired handset and press
MENU
/SELECT
. The outside
call is put on hold and your handset screen shows
Transferring call...
or
Transferring call to all...
. The other handset rings and shows
Transfer
from HANDSET X
(
X
represents the handset number).
3. To answer the call on the destination handset, press , press PHONE/
FLASH
or
/SPEA�ER SPEA�ER , or any dialing key ( 0 - 9 , , or # ). The initiating handset shows
Call transferred and goes to idle mode.
NOTES:
To cancel the transfer and return to the external call before the blind transfer call is
answered, press
OFF
/
CANCEL on your handset.
If the other handset does not answer the transfer within 30 seconds, the transfer ends
and the original handset rings while showing No response to transfer . If the original
handset does not pick up within 30 seconds, the handset returns to idle mode and the
outside call ends.
•
•
•
•
Options while on calls
>Transfer
Intercom