AT&T CL84107 Complete User'S Manual Download Page 124

Page: 124 / 160

Answering system

118

Message playback

If you have new messages, you hear only the new messages in chronological

order. If there are no new messages, the system plays back all old messages

(in chronological order). If there are both new and old messages, you have the

option of playing the new or old messages.
When playback begins, the total number of messages is announced. Before

each message, you hear the day and time of the recording. If the date and

time are not set, you hear,

“Time and date not set,”

before playback. After the

last message, you hear,

“End of messages.”

If the recording time is less than

three minutes, you hear,

“Less than three minutes to record”

before playback

(see

Message capacity

on page 116).

To listen to messages at the telephone base:

Press

/PLAY/

STOP

on the telephone base to listen to

new messages.

If there are new and old messages, press

MENU

/SELECT

. Press

CID

DIR

to select

Play new

msgs

Play old msgs

then press

MENU/

SELECT

/PLAY/STOP

If there are only new or only old messages, they are

played automatically.

The system announces the number of messages, then

begins playback. The message sequence is shown

on the telephone base. If there are no recorded

messages, the telephone base shows

No message

and

you hear,

“You have no message.”

To listen to messages on a cordless handset:

1. When the handset is in idle mode, press

MENU/

SELECT

enter the main menu.

2. Press

MENU

/SELECT

again to select

Play messages

If there are new and old messages, press

CID

DIR

to select

Play new msgs

Play old msgs

then press

MENU/

SELECT

If there are only new or only old messages, they are

played automatically.

The system announces the number of messages, then

begins playback. The message sequence is shown on the

handset. If there are no recorded messages, the handset

shows

No message

and you hear,

“You have no message.”

3 New messages

ANS ON

You have:

>Play new msgs

Play old msgs

ANS ON

Charlie Johnson

4-Repeat 6-Skip

MSG#

1/3

10:01

NEW

ANS ON

NEW

10:01

10/15

NEW MSG #1/3

Charlie Johnson

NEW

>Play new msgs

Play old msgs

You have:

3 New messages

Summary of Contents for CL84107

































































































































































Search results

Summary of Contents for CL84107

Reviews:

Brands by name

Popular brands

AT&T CL84107, Complete User'S Manual

Search results

Summary of Contents for CL84107

Reviews:

Brands by name

Popular brands