AT&T CL84107 Complete User'S Manual Download

Page: 10 / 160

Getting started

Quick reference guide - telephone base

FLASH/PTT

Press to initiate a one-to-one (page

54) or one-to-group broadcast (page

55).

Press and hold to broadcast to a group of

system devices (page 55).

During a call, press to answer an

incoming call when you receive

a call waiting alert (page 43).

CANCEL

While in a menu, press to cancel an

operation, back up to the previous

menu, or exit the menu display; or

press and hold to exit to idle mode.

When the telephone base is ringing,

press to mute the ringer temporarily

(page 40).

Press and hold while the telephone

is not in use to erase the missed call

indicator.

DIR

Press

DIR

to show directory entries

when the telephone is not in use (page

61).

Press to scroll up while in menus and lists.

While entering names or numbers,

press to move the cursor to the right.

CID

Press

CID

to show caller ID

log when the telephone is not in use

(page 71).

Press to scroll down while in menus and

lists.

While entering names or numbers,

press to move the cursor to the left.

MENU/SELECT

When the telephone is not in use, press

to show the menu.

While in the menu, press to select an

item or save an entry or setting.

/FIND HS

While the telephone is idle, press to

page all handsets (page 48).

VOL/

VOL

During message playback or call

screening, press to adjust the listening

volume (page 119).

While in idle mode, press to adjust the

base ringer volume.

When on a call, press to adjust the

listening volume.

IN USE indicator

On when the telephone is in use, or when

the answering system is answering an

incoming call.

On when a handset is being registered.

Flashes when there is an incoming

call or when all handsets are being

deregistered.

Flashes when another telephone is in use

on the same line.

Summary of Contents for CL84107

































































































































































Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands

AT&T CL84107, Complete User'S Manual

Search results

Summary of Contents for CL84107

Reviews:

Related manuals for CL84107

Brands by name

Popular brands