Getting started
Install the telephone, as shown below.
The telephone is ready for tabletop use. If you want to change to wall-mounting,
see
Installation options
on page 6 for details.
Telephone installation
Plug one end of the coiled handset cord into the handset jack on the left side
of the telephone base. Plug the other end into the jack on the bottom of the
handset.
1.
Plug one end of the telephone line cord into the telephone line jack on the
bottom of the telephone base. Route the telephone line cord through the
slot. Plug the other end of the telephone line cord into a telephone wall jack
or a DSL filter.
Plug the power adapter into an electrical outlet not controlled by a
wall switch.
2.
3.
DSL filter (not included)
is required if you
have DSL high-speed
Internet service.
Telephone wall jack
Route the power adapter
cord and the telephone line
cord through the slots.
Electrical outlet
not controlled by
a wall switch
