background image

The other party is blocking name information.

The other party is blocking number information.

The other party is blocking both name and
number information.

Your phone company is unable to receive the
other party’s name information.

Your phone company is unable to receive the
other party’s number information.

Your phone company is unable to receive the
other party’s name and number information.

An extension phone on this line is being used,
so call information cannot be received.

Display Messages

 Screen Display:

        When:

PRIVATE NAME

PPP

PRIVATE CALLER

UNKNOWN NAME

UUU

UNKNOWN CALLER

EXTENSION USED

1

USER’S MANUAL

Part 2

Revised 8/25/00

Call Display 436

Fold open this manual for
information about this  product’s
installation and operation.  Please
also read 

Part 1 – Important

Product Information.

Para recibir este manual en español, por favor llame al 1 800 222-3111.

AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.

© 2000 Advanced American Telephones.  All rights reserved.

Printed in ?.  xxxxxxxxx  Issue 1AT&T  9/00

F.P.O.

NEED 436 MODEL

Summary of Contents for Call Display 436













Reviews: