1
year
warranty
www.att.com/electronics
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Concept 101 LLC is under
license.
© 2016 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are
trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New
York, New York 10018. Printed in China. Issue 1.0 AT&T 2/2016.
The AT&T brands are used under license.
Any repair, replacement, or warranty
service, and all questions about this
product should be directed to Concept
101 LLC at
www.att.com/electronics
or
call
1(888) 920-8680
from the USA or
Canada. Concept 101 LLC warrants that the product will be
free from defects in material, parts and workmanship for the
period of one (1) year from date of purchase. Concept 101 LLC
agrees that it will, at its option, replace the defective product
with either a new or remanufactured product equivalent to
your original purchase during the warranty period. Please be
advised the returned product must carry the proof of
purchase.
Concept 101 LLC does not warrant that the product will work properly in
all environmental conditions, and makes no warranty and
representation, either implied or expressed, with respect to the quality,
performance, merchantability, or fitness for a particular purpose other
than the purpose identified within this user’s manual. Concept 101 LLC
has made every effort to ensure that this user’s manual is accurate and
disclaims liability for any inaccuracies or omissions that may have
occurred. Information in this user’s manual is subject to change
without notice and does not represent a commitment on the part of
Concept 101 LLC. Concept 101 LLC reserves the right to make
improvements to this user’s manual and/or to the products described
in this user’s manual at any time without notice. If you find information
in this manual that is incorrect, misleading, or incomplete, please
contact us through our website.
Controls
Button Functions
Phone button
- When playing music, press and release to pause
music; press and release again to play music.
- When receiving an incoming call, press and
release to answer; press and release to end the
call.
- Press twice quickly to call the last
number dailed.
Note:
When playing music and a call comes in, the
music will pause and you will hear a ringtone.
The music will resume when the call is ended.
Wireless earbuds
model #:BTE01
Thank you for purchasing
Wireless earbuds [BTE01]
LED indicator
Microphone
Volume up/
track forward
Volume down/
track back
Phone
button
Micro
USB port
quick
start guide
Wireless Earbuds
Volume up/track forward
- Press to play next track
- Press and hold to raise volume
Volume down/track back
- Press to play previous track
- Press and hold to lower volume
Note:
The button functions may vary per device.
Charging your BTE01
Note:
Make sure your BTE01 is fully charged
before using it for the first time.
- Gently plug the Micro-USB end of the included
charging cable into the charge port of the
control box.
- Plug the USB end of the cable into a powered
USB port, such as a computer, laptop, or a USB
AC adapter (not included).
- The LED indicator located on the control box will
glow red. Once the headset is fully charged, the
LED power indicator will turn off.
Note
- The LED indicator will light up red while charging
even if the BTE01 is off.
- You cannot charge your BTE01 while listening to
music.
Connect via Bluetooth
®
(first time set-up)
Note:
Adjust the volume of your device and
the BTE01 to a comfortable volume
before use.
- Move the power swithc on the side of the BTE01
to the “ON” position. The LED indicator light on
the control box will flash blue.
- Open the settings on your Bluetooth device
(Bluetooth must be enabled).
- Select “BTE01” from the list of Bluetooth
devices.
- Once paired, the LED indicator light will flash
blue slowly.
- To turn off the BTE01, move the power switch on
the side to the “OFF” position.
Support
For any questions or support please visit
http://www.att.com/electronics
and click on the
Support tab.
70 mm
70 mm
153 mm
Tri-Fo ld
BTE01 QSG
Size: 153 X 70 mm (when folded 51 X 70 mm)
Printed on both sides (white uncoated paper, 100g)
Side A
Side B
Don’t print!
Please don’t print Layer “Info” here!
quick
start guide
Wireless Earbuds
Wireless earbuds
model #:BTE01
