AT&T administration and, Installation And Maintenance Manual

Page: 325 / 404

Call Coverage
4 Leave programming mode by sliding the T/P switch to
the center position.
NOTE:
Digital phones: Dial #00.
The Call Coverage feature allows you to cover calls,
including intercom calls, for other voice terminals in your
system. To program this feature, follow these steps:
1
2
3
4
5
6
Label a button with lights.
Enter programming mode by sliding the T/P switch to
P.
NOTE:
Digital phones: Dial #33.
Press the button just labeled that you want to program.
Dial
✱
40 to assign primary coverage or
✱
50 to assign a
secondary coverage;
Dial the intercom number of the person you are
covering.
To assign a Ringing Option, press the Cover button,
then dial the appropriate code for the type of ringing
you prefer:
>
Dial
✱
35 for no ring.
The red light next to the button goes off.
> Dial
✱
36 for delayed ring.
The red light next to the line button flashes.
> Dial
✱
37 for immediate ring.
The red light next to the line button goes on steady.
Program another feature or leave programming mode
by sliding the T/P switch to the center position.
NOTE: Digital phones: Dial #00.
Programming Voice Terminals