AT&T administration and, Installation And Maintenance Manual

Page: 309 / 404

TABLE 3-6 BIS-34D Console Administration (continued)
F e a t u r e
Centralized Programming
Dialing Timeout Interval for
Rotary Lines
Direct Inward System Access
To assign lines for DISA
To specify a password for
DISA users
Procedure: Slide T/P switch to P, press Conference
button twice, then follow steps for feature
1 Press Conference.
2 Press Auto Intercom button for phone to be programmed.
3 If red light next to Adm Tel goes off and console rings way
5 seconds, go on to step 4. If not, wait for
light to go off or
try again later.
4 Program the voice terminal.
5 Press Conference twice.
1 Press Message.
2 Dial #317.
3 Dial number to specify timeout interval
0 = 0 seconds
1 = 4 seconds
2 = 8 seconds
3 = 12 seconds
4 Press Message.
1 Press Message.
2 Dial #323.
3 Press line button:
Steady green light on = line used for DISA
Green light off = line not used for DISA
4 Press Message.
1 Press Message.
2 Dial #324.
3 Dial a 4-digit password or touch Drop to remove entry.
4 Press Message.
3-100 Optional Features