AT&T administration and, Installation And Maintenance Manual

Page: 241 / 404

assigned to a pool, it cannot
be
assigned
to
a second
pool nor to an individual as a personal line.
• The system can have as many as 11 different line
pools. If the business has special-purpose lines, such
as WATS or FX lines, they should be assigned to
separate pools. Do not mix types of lines in a pool,
because people in the system cannot control which line
they get when they access the pool.
• You can assign all, some, or none of the system’s lines
to a single pool, but you cannot assign any line to more
than one pool.
• If the system has Loudspeaker Page and the Music-
on-Hold features, the loudspeaker paging system and
the music source are connected to line jacks. A
Loudspeaker Page line cannot be assigned to line
pools, but you can assign the individual line to
appropriate stations, such as attendant consoles.
• On analog phones, the system automatically assigns
the main pool or Pool Access to the two buttons above
the Intercom buttons, and you cannot change this
assignment. On the 7406D phone, the main pool or
Pool Access is automatically assigned to buttons in the
leftmost and middle column.
• If a line appears as an individual line at a phone in the
system, it wilI disappear from that phone if you add it
to a line pool. Before adding lines to pools, make sure
they aren’t needed as individual lines.
Initially, all lines are assigned to the main pool (default
pool 9). You must remove lines from the main pool in
order to do the following:
●
Assign them to other line pools
•
Use them as personal lines
• Use the line jacks for Music-on-Hold or Loudspeaker
Page
Administering a New System 3-33