AT&T 6386 WGS, Installation And Maintenance Manual

Page: 117 / 213

4 Remove the AUDIX
a At the S o f t w a r e
and press [Enter].
A list of packages
Voice Power software by following this procedure:
Setup menu, move the cursor to Remove package
appears.
b Type the number of the AUDIX Voice power package and
press [Enter].
The package will be removed.
5 Install the new AUDIX Voice Power package by following this
procedure:
a
b
c
d
e
f
9
At the Software Setup menu, move the cursor to Install 1 package
and press [Enter].
If there is more than one disk drive, select the number of the disk
drive that you wish to use.
You will be prompted to put a diskette in the floppy disk drive.
Place the first diskette in the floppy disk drive and press [Enter].
A confirmation message appears on the screen. You are then
prompted to insert the next diskette into the floppy disk drive.
Insert the next diskette and press [Enter] to continue.
A confirmation message appears on the screen. You are then
prompted to insert each additional diskette into the floppy disk drive.
Insert the requested diskette and press [Enter] to continue.
After the last diskette, you are prompted to enter the login of the
AUDIX System Administrator.
Type audix and press [Enter].
You will be asked to confirm.
Press [Enter].
A series of file names that are being moved will scroll on the screen.
Remove the last diskette from the floppy disk drive.
An installation confirmation message appears.
Upgrade Procedures 5-5