INSTALLATION
•
NOTE
: Install this telephone away from electronic equipment,
such as personal computers, television sets or microwave ovens.
Avoid excessive heat, cold, dust or moisture.
1
Connect the telephone line cord. (figure a)
2
Connect the power cord to the base and an electrical outlet not
controlled by a wall switch. (figure a)
CL
flashes in the message
window.
Use only the power cord supplied with this product.
If you need a replacement, call 1-800-222-3111.
3
Install the handset battery. Use only AT&T Battery 2401,
SKU# 91077. (figure b)
4
Charge the handset battery.
•
Place the handset in the base.
•
Charge the battery at least 12 hours. After the first charge,
the battery will charge in eight hours.
For detailed installation instructions, to use the belt clip, or to
use a headset with this phone please refer to the
INSTALLATION
section of your User’s Manual.
FEATURE SETUP
QUICK START GUIDE
5.8 GHz Cordless Answering
System 3658B with
Caller ID/Call Waiting
b) Align the contacts
and place the
battery pack in
the battery
compartment
a) Remove battery
compartment
cover by pressing
on indentation
and sliding
downward.
Modular
telephone
jack
Standard
electrical
outlet
Power Cord
Line Cord
figure a
figure b
c) Replace cover
by sliding it on its
track up over bat-
tery case until it
snaps firmly into
place.
Set Time
You can choose to set the handset time manually, or you can allow it
to be set automatically with incoming Caller ID information.
1
Press
on the handset.
2
Press
until the screen displays
3
Press
. The screen displays the current time setting.
Use
to move the cursor, use the keypad to change a
digit. Select .
4
Press
to save the displayed time.
NOTE
: To set up the answering system clock, please refer
to ANSWERING SYSTEM section on this page or see “Set the
Clock” in ANSWERING SYSTEM OPERATION on page 45 of
your User’s Manual.
FEATURE SETUP continued on back
SAVE
AM/PM
OK
CALLS LOG
INTERCOM
HANDSET SETTINGS
MENU
▲
OK
▼
SET TIME
ATT3658B_QSG 5/19/04 5:28 PM Page 1
