Atag VA98211TT, Operating Instructions Manual

Page: 46 / 64

Settings
Do as follows to open the settings menu:
First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button. 1.
Press and hold the On/Left-on mode button until the display lights up. 2.
Within five seconds, press and hold the Programme selector and the Long dry button. 3.
+
Release the buttons when the display shows . 4.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to open
the settings menu the first time.
Press to save the set value and continue to the next
setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
Description Settings Options Button press
You can activate the child lock (button lock) option to
prevent children from starting the dishwasher.
Child lock
(button lock)
(Off)
(On)
Press the High temperature and Long dry buttons
simultaneously to temporarily deactivate the button lock
when you want to start the dishwasher. The button lock is
automatically reactivated after 2 minutes.
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
The dishwasher uses a buzzer to indicate when a
programme is finished or when a fault has occurred.
Buzzer volume
(Off)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
This sound is used to confirm each button press. Operation volume
(Off)
(Low)
(High)
12