Quick guide
Load the baskets
1.
(See page 7.)
Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off
large food particles before loading the dishwasher.
Check that the spray arms can rotate freely
2.
Check also that the water tap is on.
Don't forget! Empty the coarse filter and clean the fine filter when necessary. (See page 17.)
Add detergent
3.
The detergent compartment has one smaller compartment for the prewash and one for the main
wash. (See page 10.)
Check/Add rinse aid and salt
4.
Top up salt and rinse aid to achieve good washing and drying results. (See page 4.)
Top up rinse aid
Top up salt
Remote start the dishwasher
5.
To remote start the dishwasher, press the navigation buttons
and
until
Remote start active
appears on the display. Close the door. In the
ATAG Connect Life
app, select the desired
programme and start the dishwasher.
The dishwasher can always be used without the app. See below.
Select a programme, programme mode and any options
6.
(See page 11.)
Press Start/Stop, close the door
START
STOP
7.
Art.
No.:
711940.
Rev.
06.
We
reserve
the
right
to
make
changes.
www.atag.nl
28
en (12-19)
Summary of Contents for VA8018WTC
