50
ATAG
2.
Press button “
” until the display shows
“0:00”. After 5 seconds the pilot lamp will go out
and the display will revert to the time of day.
“End of cooking” function
With this function, you can set the oven to switch off
automatically when a programmed end of cooking
time is over. Place food in the oven, select a cooking
function and adjust the cooking temperature.
Press button
SELECT
repeatedly to select the “End
of cooking” function.
The relevant pilot lamp
will start flashing. Then,
proceed as follows:
To set the end of cooking time:
1.
Press button “ ” or “ ”.
2.
After the setting is carried out, wait for 5
seconds: the “End of cooking” pilot lamp
will
come on and the display will revert to the time of
day.
3.
When cooking time is over, the oven will
be switched off automatically and an acoustic alarm
will be heard, and the pilot lamp will start flashing.
Turn the oven function and the thermostat control
knob to zero.
To switch off the acoustic alarm, press any button.
NOTE:
turning the acoustic alarm off will reset the
oven to manual, and if the oven function and the
thermostat knobs are not set to zero the oven will
start to heat again.
To cancel the end of cooking time:
1.
Press button
SELECT
repeatedly to select
the “End of cooking” function. The relevant pilot
lamp
will flash and the display will show the
programmed End of cooking time.
2.
Press button “
” until the display shows
the current time of day. The programmer will beep
and the pilot lamp will go out.
