Atag KD80102ADN, User Manual

Page: 21 / 36

The following displays indicate a fault. Possible causes and
solutions: (see 7 Malfunctions) .
-
F0
to
F9
4 Putting into operation
4.1 Transporting the appliance
u
Transport the appliance only in suitable packaging.
u
Transport the appliance upright.
u
Do not transport the appliance on your own.
4.2 Switching on the appliance
u
Open the door.
u
Press the On/Off button
Fig. 2 (1)
.
w
The temperature display lights up. The interior
light goes on when the door is opened. The appli-
ance is switched on.
w
If “DEMO” is displayed, demo mode is activated.
Please contact the after sales service.
5 Control
5.1 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.1.1 Setting the child lock
To activate the setting mode:
u
Press the Fast Cool button
Fig. 2 (4)
for approx. 5 seconds.
w
The Menu symbol is shown on the display,
Fig. 2 (8)
.
w c
flashes on the display.
To switch on the function:
u
Briefly confirm using the Fast Cool button
Fig. 2 (4)
.
w c1
appears on the display.
u
Briefly confirm using the Fast Cool button
Fig. 2 (4)
.
w
The child lock symbol,
Fig. 2 (9)
, lights up on the
display.
w c
flashes on the display.
w
The child lock function is switched on.
If the function is to be switched off:
u
Briefly confirm using the Fast Cool button
Fig. 2 (4)
.
w c0
appears on the display.
u
Briefly confirm using the Fast Cool button
Fig. 2 (4) .
w
c flashes in the display.
w
The child lock function is switched off.
To end the setting mode:
u
Briefly press the On/Off button Fig. 2 (1) .
w
The temperature display shows the temperature again.
5.2 Refrigerating food
The coldest areas are directly above the vegetable compart-
ments and along the back wall. The warmest area is at the top
front and in the door.
Note
The energy consumption increases and the cooling perform-
ance decreases if the ventilation is inadequate.*
u
Always keep the air slits of the fan free.
u
Store perishable foods such as ready-to-eat meals, meat
and sausages in the coldest area. Place butter and
preserves in the top area and in the door. (see 1 Appliance
at a glance)
u
Use reuseable plastic, metal, aluminium, glass containers
and foil wrap to store food.
u
Always store raw meat and fish in clean, sealed containers
on the bottom shelf of the refrigerator, to prevent them
coming into contact with or dripping onto other foods.
u
Foods that easily absorb or give off smell or taste, as well as
liquids, should be stored in sealed containers or covered.
The following applies for appliances from 1218 mm:
u
Use the front area of the base shelf only to temporarily set
down refrigerated foods, for example while rearranging or
sorting the contents. Remember not to leave refrigerated
foods here as they could shift to the back or tip over when
you close the door.
u
Do not pack foods too closely together, as the air needs to
circulate.
5.3 Setting the temperature
The temperature depends on the following factors:
-
the frequency of opening the door
-
how long the door is open for
-
the room temperature of the installation location
-
the type, temperature and quantity of the food
Recommended temperature setting: 5 °C
The temperature can be adjusted continually. Once the 1 °C
setting is reached, the sequence starts again at 9 °C .
u
Call up the temperature function: Press the "+/-"
setting button
Fig. 2 (3)
.
w
The previously-set value will flash in the tempera-
ture display.
u
Change the temperature in 1 °C steps: Press
the "+/-" setting button
Fig. 2 (3)
until the
required temperature is indicated in the tempera-
ture display.
u
Change temperature continually: hold down
setting button.
w
During adjustment the value flashes on the display.
w
The new setting is adopted approx. 5 seconds after the
last time the button was pressed and the set temperature
displayed again. The temperature in the interior gradually
adjusts to the new value.
5.4 Fast Cool
Use FastCool to quickly cool large quantities of food.
The fan* runs when FastCool is activated*. The appliance
works at maximum refrigerating power. Any noises from the
cooling unit may be temporarily louder as a result.
Fast Cool has a slightly higher energy consumption
5.4.1 To cool using Fast Cool
u
Briefly press the Fast Cool button Fig. 2 (4) .
w
The Fast Cool symbol Fig. 2 (5) illuminates in the display.
w
The cooling temperature drops to the coldest value.
Fast Cool is switched on.
Putting into operation
* Depending on model and options 21