Using the extraction module
The extraction module is equipped with a movable tower. Using the tower in the raised position, the
extraction module will catch vapour more effectively, especially when using tall pans.
•
The tower has two positions; lowered and raised. The position can be changed by touching the
tower up/down key. By default, the tower rises automatically when the induction hob is operated.
This can be changed in the '
' menu.
•
Change the extraction setting with the - (minus) and + (plus) keys for the fan (1-4 and boost).
Setting the extraction level to '0' will manually switch off the extraction module or activate the Air-Dry
function if necessary. Use Synchro Stop to automatically switch off the extraction module upon
switching off the hob.
When the tower up/down key is touched during movement, the direction of movement is immediately
changed. Also, if upward movement is obstructed (by an object for example) the direction of
movement changes.
WARNING!
Make sure no objects obstruct the tower in its movement. Any object that is lifted or tilted may
damage the hob and create a hazard (for example, spilling hot contents).
NOTE!
Disable setting 'Automatic raising of the tower' if it is undesirable for the tower to rise automatically
when the extraction is switched on. See chapter '
If the hob is switched off (manually or automatically) while the tower is in the raised position, the
tower automatically lowers.
Automatic extraction
The extraction module has three automatic extraction settings (see chapter '
•
Synchro Control:
Extraction is automatically controlled when a cooking zone is operated (the
higher the power level of the cooking zone, the higher the extraction). Synchro Control overrides
Synchro Start.
•
Synchro Start:
Extraction switches on at a fixed setting when a cooking zone is operated. Set the
fixed setting via the settings menu.
•
Synchro Stop:
The extraction module is automatically switched off and is set to the Air-Dry
function if necessary upon switching off the hob.
24
Use
