Asycube 380 & 530
Operating Manual
000.101.151
Version: B
31
/
50
Locate the identification label at the
back of the product and check that
the serial number corresponds to the
delivery note
You need this serial number for any
correspondence with Asyril.
Figure 3-1: Product label
(example for Asycube 530)
Installation and storage environment
IMPORTANT!
The Asycube must be mounted on a smooth, flat and strong surface.
Installation environment
The Asycube can be used under following conditions:
-
Protection rating: IP50
-
Working temperature: +5 °C to +40 °C
-
Humidity: 30% to 80% max. non-condensing
WARNING!
Variations in humidity or temperature may affect the global performance of the Asycube.
-
Do not expose the Asycube to water or other liquids
IMPORTANT!
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce
the structural strength of the device.
Storage environment
The storage environment should be similar to the operating environment. In addition, it is important to
protect the Asycube against dust.
