3-13
Chapter 3: BIOS setup
3.3.9
APM Configuration
ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to
[Enabled]
, all other PME options will be switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Restore AC Power Loss
[Power Off]
The system goes into off state after an AC power loss.
[Power On]
The system goes into on state after an AC power loss.
[Last State]
The system goes into last state after an AC power loss.
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled]
[Enabled]
Power On By Ring
[Enabled]
Enables the Ring devices to generate a wake event.
[Disabled]
Disables the Ring devices to generate a wake event.
Power On By RTC
[Enabled]
When set to [Enabled], the items
RTC Alarm Date(Days)
and
Hour/Minute/Second
are use-configurable with set values.
[Disabled]
Disables RTC to generate a wake event.
3.3.10 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Configuration
options: [Disabled] [Enabled]
