H110T-CM-A R2.0
2-14
2.6.2
Internal connectors
1. ATX Power connector (2-pin ATX19V)
Correctly orient the ATX power supply plug into this connector and push
down firmly until the connector completely fits.
PIN 1
ATX19V
DC_JACK_IN
GND
CAUTION:
Do not forget to connect the fan cables to the fan headers.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
headers!
2. CPU and Chassis fan headers (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan headers on the motherboard, ensuring that
the black wire of each cable matches the ground pin of the header.
CPU_FAN
O_CHAFAN_PWM_Q
O_CHAFANIN1_R
CHAFANPWR
GND
O_CPUFAN_PWM_Q
O_CPUFANIN_R
+12V GND
B
CHA_FAN
A
A
PIN 1
PIN 1
B
Connector type
WAFER HD 4p, 2.54mm pitch, S/T
NOTE:
This connector supports 12V and 19V by models. Refer to the
specification sheet of the model for details.
