Asus Z9PR-D16 Manual Download Page 177

Page: 177 / 194

ASUS Z9PR-D16

6-25

6.6

Intel

Rapid Storage Technology

enterprise 3.0 installation

This section provides the instructions on how to install the Intel

Rapid Storage

Technology enterprise 3.0 on the system.
You need to manually install the Intel

Rapid Storage Technology enterprise 3.0

utility on a Windows

operating system.

To install the Intel

Rapid Storage Technology enterprise 3.0 utility:

1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the

Intel

Rapid Storage Technology enterprise 3.0

to begin

installation.

4. When the

Welcome to the Setup Program

appears, click

Next

to start the

installation.

Summary of Contents for Z9PR-D16



































































































































































































Search results

Summary of Contents for Z9PR-D16

Reviews:

Brands by name

Popular brands

Asus Z9PR-D16, Manual

Search results

Summary of Contents for Z9PR-D16

Reviews:

Brands by name

Popular brands