Asus Z9PH-D16 FDR User Manual Download Page 180

Page: 180 / 192

6-34

Chapter 6: Driver installation

6.9 Mellanox ConnectX-3 Infiniband driver

installation (Z9PH-D16/QDR and Z9PH-D16/

FDR only)

This section provides instructions on how to install the Mellanox driver.

6.9.1 Windows operating system

You need to manuall install the Mellanox driver on a Windows

operating system.

To install the Mellanox driver:
1. Restart the computer, then log on with Administrator privileges.
2. Insert the

Mellanox Infiniband support DVD

to the optical drive. The

support DVD automatically displays the Drivers menu if Autorun is enabled in

your computer.

3. Click

Mellanox ConnectX Virtual Channel Adapter Driver.

4. Click

Next

to start installing the driver.

Summary of Contents for Z9PH-D16 FDR

































































































































































































Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Brands by name

Popular brands

Asus Z9PH-D16 FDR, User Manual

Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Brands by name

Popular brands