Asus Z9PH-D16 FDR User Manual Download Page 141

Page: 141 / 192

ASUS Z9PH-D16 Series

5-35

5.4

Intel

Rapid Storage Technology

enterprise Utility (Windows)

The Intel

Rapid Storage Technology enterprise utility allows you to create RAID 0,

RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives

that are connected to the Serial ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

1. Turn on the system to windows desktop.
2. Click the

Intel

Rapid Storage Technology enterprise

icon to display the

main menu.

Your storage system is configured for data protection, increased performance and

optimal data storage capacity. You can further optimize your storage system by

creating additional volumes.

To enter the Intel

Rapid Storage Technology enterprise SCU option ROM utility

under Windows operating system:

Summary of Contents for Z9PH-D16 FDR

































































































































































































Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Brands by name

Popular brands

Asus Z9PH-D16 FDR, User Manual

Search results

Summary of Contents for Z9PH-D16 FDR

Reviews:

Brands by name

Popular brands