Asus Z9PE-D16 Series User Manual Download

Page: 184 / 194

6-32

Chapter 6: Driver installation

6.9

Management applications and utilities

installation

The support DVD that came with the motherboard package contains the drivers,

management applications, and utilities that you can install to avail all motherboard

features.

The contents of the support DVD are subject to change at any time without

notice. Visit the ASUS website (www.asus.com) for updates.

6.9.1

Running the support DVD

Place the support DVD to the optical drive. The DVD automatically displays the

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file A

SSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

6.9.2

Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system

versions.

Summary of Contents for Z9PE-D16 Series



































































































































































































Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands

Asus Z9PE-D16 Series, User Manual

Search results

Summary of Contents for Z9PE-D16 Series

Reviews:

Related manuals for Z9PE-D16 Series

Brands by name

Popular brands