manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 163 / 186

Share
Download
Asus Z97-WS User Manual Download Page 163

Z97-WS

5-3

Chapter 5

5.1.4 Intel

®

 Rapid Storage Technology Option ROM utility

To enter the Intel

®

 Rapid Storage Technology Option ROM utility:

1. 

Turn on the system.

2. 

During POST, press <Ctrl> + <I> to display the utility main menu.

 

The navigation keys at the bottom of the screen allow you to move through the menus 

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not 

exactly match the items on your screen.

The utility supports maximum four hard disk drives for RAID configuration.

RAID Volumes:

None defined.

Physical Devices:

Port   Device Model   Serial # 

  Size 

Type/Status(Vol ID)

0      ST3160812AS    9LS0HJA4 

  149.0GB 

  

Non-RAID Disk

1      ST3160812AS    9LS0F4HL 

  149.0GB 

  

Non-RAID Disk

2      ST3160812AS    3LS0JYL8 

  149.0GB 

  

Non-RAID Disk

3      ST3160812AS    9LS0BJ5H 

  149.0GB 

  

Non-RAID Disk

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments