manualshive.com logo in svg

Asus Z87-Deluxe/Dual, User Manual, Page: 157 / 168

Share
Download
Asus Z87-Deluxe/Dual User Manual Download Page 157

ASUS Z87-DELUXE/DUAL

5-3

Chapter 5

5.1.4 

Intel

®

 Rapid Storage Technology Option ROM utility

To enter the Intel

®

 Rapid Storage Technology Option ROM utility:

1. 

Turn on the system.

2. 

During POST, press <Ctrl> + <I> to display the utility main menu.

 

The navigation keys at the bottom of the screen allow you to move through the menus 

and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not 

exactly match the items on your screen.

The utility supports maximum four hard disk drives for RAID configuration.

Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation.  All Rights Reserved.

[

 

MAIN MENU

 

]

 [ DISK/VOLUME INFORMATION ]

 

RAID Volumes:

 

None defined.

 

Physical Devices:

 

Port Device Model    Serial #                 Size  Type/Status(Vol ID)

 

0    ST3160812AS     9LS0HJA4              149.0GB 

 

1    ST3160812AS     9LS0F4HL              149.0GB

 

2    ST3160812AS     3LS0JYL8              149.0GB

 

3    ST3160812AS     9LS0BJ5H              149.0GB

[

↑↓

]-Select 

 [ESC]-Exit          [ENTER]-Select Menu

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID

4. Recovery Volume Options
5. Acceleration Options
6. Exit

Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk

Summary of Contents for Z87-Deluxe/Dual









































































































































































Reviews:

No comments