Asus Z78-PLUS User Manual Download Page 113

Page: 113 / 174

ASUS Z87-PLUS

3-35

Chapter 3

3.6.7

Onboard Devices Configuration

Scroll down to view the other BIOS items.

HD Audio Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

The following items appear only when you set the HD Audio Controller

[Enabled]

Front Panel Type [HD]

Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or

high-definition audio depending on the audio standard that the front panel audio

module supports.

[HD]

Sets the front panel audio connector (AAFP) mode to high definition

audio.

[AC97]

Sets the front panel audio connector (AAFP) mode to legacy AC’97

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to an SPDIF audio output.

[HDMI]

Sets to an HDMI audio output.

Summary of Contents for Z78-PLUS















































































































































































Search results

Summary of Contents for Z78-PLUS

Reviews:

Related manuals for Z78-PLUS

Brands by name

Popular brands

Asus Z78-PLUS, User Manual

Search results

Summary of Contents for Z78-PLUS

Reviews:

Related manuals for Z78-PLUS

Brands by name

Popular brands