Asus Z78-PLUS User Manual Download Page 107

Page: 107 / 174

ASUS Z87-PLUS

3-29

Chapter 3

Active Memory Threshold [0]

Key in the value for the additional partition size for Rapid Start Technology

to work.

Ensure that the caching partition size is larger than the total memory size.

Hybrid Hard Disk Support [Disabled]

Allows you to enable or disable the hybrid hard disk support.

Configuration options: [Enabled] [Disabled]

Intel Smart Connect Technology [Disabled]

Allow you to enable or disable the Intel

Smart Connect Technology.

Configuration options: [Enabled] [Disabled]

3.6.3

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show

Not Present

if no SATA device is installed to the corresponding SATA

port.
Scroll down to display the other BIOS items.

Summary of Contents for Z78-PLUS















































































































































































Search results

Summary of Contents for Z78-PLUS

Reviews:

Brands by name

Popular brands

Asus Z78-PLUS, User Manual

Search results

Summary of Contents for Z78-PLUS

Reviews:

Brands by name

Popular brands