Asus Z11PA-U12 series User Manual Download Page 95

Page: 95 / 164

4-31

Z11PA-U12 Series

4.6

Socket Configuration menu

The IntelRCSetup menu items allow you to change the socket settings.

4.6.1

Processor Configuration

To quickly go to the last item of the second page, press the

Page Down

button. Press the

Page Up

button to go back to the first item in the first page.

Navigate to the second page of the screen to see the rest of items in this menu by pressing

the Up or Down arrow keys.

Hyper-threading [ALL] [Enabled]

This item allows a hyper-threading processor to appear as two logical processors, allowing

the operating system to schedule two threads or processors simultaneously.

Configuration options: [Disabled] [Enabled]

Summary of Contents for Z11PA-U12 series





































































































































































Search results

Summary of Contents for Z11PA-U12 series

Reviews:

Related manuals for Z11PA-U12 series

Brands by name

Popular brands

Asus Z11PA-U12 series, User Manual

Search results

Summary of Contents for Z11PA-U12 series

Reviews:

Related manuals for Z11PA-U12 series

Brands by name

Popular brands