manualshive.com logo in svg

Asus Z10PH-D16, User Manual, Page: 84 / 184

Share
Download
Asus Z10PH-D16 User Manual Download Page 84

4-22

Chapter 4: BIOS setup

4.4.11  USB Configuration

Legacy USB Support [Enabled]

Allows you to enable or disable Legacy USB device support.

Configuration options: [Enabled] [Disabled] [Auto]

XHCI Hand-off [Enabled]

This is a workaround for 0Ses without XHCI hand-off support. The XHCI ownership change 

should be claimed by XHCI driver. 
Configuration options: [Disabled] [Enabled]

EHCI Hand-off [Disabled]

This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change 

should be claimed by EHCI driver. 

Configuration options: [Disabled] [Enabled]

USB Mass Storage Driver Support [Enabled]

Allows you to enable or disable the USB Mass Storage drvier support.

Configuration options: [Disabled] [Enabled] 

Port 60/64 Emulation [Enabled]

This allows you to enable the I/O port 60h/64h emulation support. This should be enabled for 

the complete USB keyboard legacy support for non-USB aware OSes. 
Configuration options: [Disabled] [Enabled] 

Summary of Contents for Z10PH-D16

























































































































































































Reviews:

No comments