manualshive.com logo in svg

Asus XC Cube box, User Manual, Page: 205 / 226

Share
Download
Asus XC Cube box User Manual Download Page 205

ASUS Z9PE-D8 WS

6-39

6.12   Management applications and utilities 

installation

The support DVD that came with the motherboard package contains the drivers, 

management applications, and utilities that you can install to avail all motherboard 

features.

The contents of the support DVD are subject to change at any time without 

notice. Visit the ASUS website (www.asus.com) for updates.

6.12.1  Running the support DVD

Place the support DVD to the optical drive. The DVD automatically displays the 

Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support 

DVD to locate the file A

SSETUP.EXE

 from the 

BIN

 folder. Double-click the 

ASSETUP.EXE

 to run the support DVD.

6.12.2  Drivers menu

The Drivers menu shows the available device drivers if the system detects installed 

devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system 

versions.

Summary of Contents for XC Cube box



































































































































































































































Reviews:

No comments