Asus XC Cube box User Manual Download Page 199

Page: 199 / 226

ASUS Z9PE-D8 WS

6-33

6.10 Intel

WG82574L Gigabit Adapters

Driver installation

This section provides the instructions on how to install the Intel

WG82574L Gigabit

Adapters Driver.
To install the

Intel

WG82574L Gigabit Adapters Driver

on a Windows

OS:

1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The DVD

automatically displays the Drivers menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

AUTORUN.EXE

and double-click the

AUTORUN.EXE

and follow step 4 to run the installation.

3. Click

Intel

WG82574L Gigabit Adapters Driver

4. When the

Intel

WG82574L Gigabit Adapters Driver

installation wizard

appears, click

Next

to start the installation.

Summary of Contents for XC Cube box



































































































































































































































Search results

Summary of Contents for XC Cube box

Reviews:

Asus XC Cube box, User Manual, Page: 199 / 226

Search results

Summary of Contents for XC Cube box

Reviews: