manualshive.com logo in svg

Asus XC Cube box, User Manual, Page: 192 / 226

Share
Download
Asus XC Cube box User Manual Download Page 192

6-26

Chapter 6: Driver installation

6.8 

 Marvell Storage Utility installation

This section provides the instructions on how to install Marvell Storage Utility 

Driver.
To install the 

Marvell Storage Utility 

on a Windows

®

 OS: 

1.  Restart the computer, and then log on with 

Administrator

 privileges.

2.  Insert the motherboard/system support DVD to the optical drive. The DVD 

automatically displays the 

Drivers

 menu if Autorun is enabled in your 

computer. 

If 

Autorun

 is NOT enabled in your computer, browse the contents of the support 

DVD to locate the file 

AUTORUN.EXE

 and double-click the 

AUTORUN.EXE

 

and follow step 4 to run the installation. 

3.   Click 

Marvell Storage Utility

.

4.  When the 

Marvell Storage Utility

 installation wizard

 appears, click 

Next

 to 

start the installation. 

Summary of Contents for XC Cube box



































































































































































































































Reviews:

No comments