Asus XC Cube box User Manual Download Page 188

Page: 188 / 226

6-22

Chapter 6: Driver installation

6.6

Marvell Magni installation

This section provides the instructions on how to install the

Marvell Magni

software

on the system.
You need to manually install the Marvell Magni software on a Windows operating

system.
To install the Marvell Magni driver:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the item

Marvell Magni

software from the menu, and then follow the

onscreen instructions to complete the installation.

Summary of Contents for XC Cube box



































































































































































































































Search results

Summary of Contents for XC Cube box

Reviews:

Asus XC Cube box, User Manual, Page: 188 / 226

Search results

Summary of Contents for XC Cube box

Reviews: