Asus X99-M WS Manual Download Page 166

Page: 166 / 176

6-6

Chapter 6: Multiple GPU support

Chapter 6

Align and firmly insert the SLI bridge connector to the goldfingers on each graphics

card. Ensure that the connector is firmly in place.

5. Connect two independent auxiliary power sources from the power supply to the two

graphics cards separately.

Connect a VGA or a DVI cable to the graphics card.

Goldfingers

SLI bridge

6.2.3

Installing the device drivers

Refer to the documentation that came with your graphics card package to install the device

drivers.

Ensure that your PCI Express graphics card driver supports the NVIDIA

SLI™ technology.

Download the latest driver from the NVIDIA website at

www.nvidia.com.

Summary of Contents for X99-M WS

















































































































































































Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands

Asus X99-M WS, Manual

Search results

Summary of Contents for X99-M WS

Reviews:

Related manuals for X99-M WS

Brands by name

Popular brands