1-4
Chapter 1: System introduction
1.3
Rear panel
The system rear panel includes the power connector and several I/O ports that
allow convenient connection of devices.
1. Voltage selector.
This switch allows you to adjust the system input voltage
according to the voltage supply in your area. See the section “Voltage
selector” on page 1-6 before adjusting this switch.
2.. Power.connector.
This connector is for the power cable and plug.
3. Power supply unit fan vent.
This vent is for the PSU fan that provides
ventilation inside the power supply unit.
13
2
1
7
9
11
6
3
10
14
16
4
8
12
5
15
Do NOT cover the rear vent , and the ambient temperature is limited up to 35
o
C
to prevent the system from overheating.
