Asus V4-M3A3200 User Manual Download

Page: 45 / 112

3-3

ASUS V-Series P5G43

3.3.1

Running the support DVD

To begin using the support DVD, place the DVD in your optical drive. The DVD

automatically displays the Drivers menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the

ASSETUP.EXE to run the DVD.

Click an item to install

Click an icon to

display support

DVD/motherboard

information

ASUS InstAll-Installation Wizard for Anti-Virus and Drivers Utility

Launches the ASUS InstAll driver installation wizard.

Norton Internet Security 2008

Installs the Norton Internet Security 2008.

Realtek Audio Driver

Installs the Realtek

ALC1200 audio driver and application.

Intel Chipset Inf Update Program

Installs the Intel

chipset Inf update program.

Intel Graphics Accelerator Driver

Installs the Intel

Graphics accerlerator driver.

Realtek RTL8111B/C 10/100/1000M LAN Driver

Installs the Realtek

RTL8111B/C 10/100/1000M LAN Driver.

ASUS EPU-4 Engine

Installs the ASUS EPU-4 Engine.

Summary of Contents for V4-M3A3200

















































































































Search results

Summary of Contents for V4-M3A3200

Reviews:

Related manuals for V4-M3A3200

Brands by name

Popular brands

Asus V4-M3A3200, User Manual

Search results

Summary of Contents for V4-M3A3200

Reviews:

Related manuals for V4-M3A3200

Brands by name

Popular brands