Asus V*-P5G45 Series Page 107 Installation Manual Download

Page: 107 / 120

ASUS V-Series P5G45

5-31

5.6

Power menu

The Power menu items allow you to change the settings for the Advanced

Power Management (APM). Select an item then press <Enter> to display the

configuration options.

5.6.1.

Suspend.Mode.[Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state

to be used for system suspend.

Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

5.6.2.

Repost.Video.on.S3.Resume.[No]

Determines whether to invoke VGA BIOS POST on S3/STR resume.

Configuration options: [No] [Yes]

5.6.3.

ACPI.2.0.Support.[Disabled]

Add additional tables as per ACPI 2.0 specifications.

Configuration options: [Disabled] [Enabled]

5.6.4.

ACPI.APIC.Support.[Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When

set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main Ai Tweaker Advanced

Power

Boot Tools Exit

Suspend Mode

[Auto]

Repost Video on S3 Resume

[No]

ACPI 2.0 Support

[Disabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

Select the ACPI state

used for System

Suspend.

Summary of Contents for V*-P5G45 Series

























































































































Search results

Summary of Contents for V*-P5G45 Series

Reviews:

Related manuals for V*-P5G45 Series

Brands by name

Popular brands

Asus V*-P5G45 Series, Installation Manual

Search results

Summary of Contents for V*-P5G45 Series

Reviews:

Related manuals for V*-P5G45 Series

Brands by name

Popular brands