manualshive.com logo in svg

Asus UP-895MD Series, User Manual

Share
Download
Asus UP-895MD Series User Manual Download Page 174

5-8

Chapter 5: RAID configurations

Chapter 5

5.2.2 

Installing the RAID driver during Windows

®

 OS 

installation

To install the RAID driver for Windows

®

 7:

1. 

During the OS installation, click 

Load Driver

 to allow you to select the installation 

media containing the RAID driver.

2.   Insert the USB flash drive with RAID driver into the USB port or the support DVD into 

the optical drive, and then click 

Browse

.

3.   Click the name of the device you’ve inserted, go to 

Drivers

 > 

RAID

, and then select 

the RAID driver for the corresponding OS version. Click

 OK

.

4.   Follow the succeeding screen instructions to complete the installation.

Before loading the RAID driver from a USB flash drive, you have to use another computer 

to copy the RAID driver from the support DVD to the USB flash drive.

Summary of Contents for UP-895MD Series





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands