manualshive.com logo in svg

Asus UP-895MD Series, User Manual

Share
Download
Asus UP-895MD Series User Manual Download Page 157

ASUS Z97-PRO Series

4-11

Chapter 4

4.4.4 

USB BIOS Flashback

USB BIOS Flashback allows you to check and save the latest BIOS version to a USB 

storage device. Use this utility to quickly check for the latest available BIOS and set the BIOS 

download schedule.

Launching USB BIOS Flashback

To launch USB BIOS Flashback, click or tap 

 on the top-right corner of the AI Suite 3 

main menu, then select 

USB BIOS Flashback

.

USB BIOS Flashback is available only in selected motherboard models.

Scheduling the BIOS download

1. 

In the Download Setting field, tick 

Schedule (days)

 then select the number of days for 

the BIOS download schedule.

2. 

Click or tap 

Apply

 to save the BIOS download schedule. Click or tap 

Cancel

 to cancel 

the download schedule.

Using USB BIOS Flashback

Set a schedule for the BIOS Update download

Click or tap to check for a new BIOS 

update available for download

Click or tap to cancel the 

download schedule setting

Click or tap to apply the download 

schedule setting

Summary of Contents for UP-895MD Series





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands