manualshive.com logo in svg

Asus TW300-E5/PI4, User Manual

Share
Download
Asus TW300-E5/PI4 User Manual Download Page 123

ASUS TW300-E5/PI4

5-13

5.3.2 

Creating a RAID 1 set (Mirror)

To create a RAID 1 set:

1.  From the utility main menu, select 

1. Create RAID Volume

, then press 

<Enter>. This screen appears.

2.  Enter a name for the RAID 1 set, then press <Enter>.
3.  Highlight 

RAID Level

, press the up/down arrow key to select 

RAID 1 

(Mirror)

, then press <Enter>.

4.  Follow steps 4 to 5 and 7 to 9 of the previous section to create the RAID 1 

set.

Intel(R) Matrix Storage Manager Option ROM v7.6.0.1011 ICH9R wRAID5

Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.

[

 

CREATE ARRAY MENU

 

]

[

 

DISK/VOLUME INFORMATION 

]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and cannot 

contain special characters.

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume1

RAID1(Mirror)

Select Disks

N/A

0.0   GB

Create Volume

       [

↑↓

]-Select 

  [ESC]-Exit          [ENTER]-Select Menu

Summary of Contents for TW300-E5/PI4















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands