Asus TUF Z390-PRO GAMING, Manual

Page: 70 / 88

3-18 Chapter 3: BIOS Setup
Chapter 3
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio
This item allows you to enable or disable the High Definition Audio.
Configuration options: [Disabled] [Enabled]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controller.
Configuration options: [Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
M.2_1 Configuration
[Auto] Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 will be disabled.
[SATA] Only supports M.2 SATA devices. Please note that SATA6G_2 port cannot
be used in this mode.
[PCIE] Only supports M.2 PCIE devices.
3.6.6 PCH-FW Configuration
This item allows you to configure the firmware TPM.
SATA6G_1 - SATA6G_6
SATA6G_1 - SATA6G_6
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
SATA6G_1 - SATA6G_6 Hot Plug
These items appears only when the SATA Mode Selection is set to [
AHCI
] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]